How to connect to an Auracast broadcast with the Audeara Link app

Audeara Link connection

Step 1: Pair the Audio Transceiver & Lapel Microphone (BT-LE) with your smartphone

• Slide the switch on the side of the BT-LE to RX (Receive).

• Power on the BT-LE by holding the button for 3 seconds (until the light turns on).

  • If the device is already in Classic Bluetooth mode, the light may automatically start flashing Blue and Red – this means it’s in Pairing Mode searching for a device to pair with.
  • If it’s not already flashing Blue and Red, double click the button to put it into Pairing Mode.

• Open the Bluetooth menu on the Smartphone and select ‘BT-LE’ from the available devices list.

  • The light will turn to a solid Blue when it has successfully paired with the smartphone.

Step 2: Connect to an Auracast broadcast using the Audeara Link app

• Open the Audeara Link app on your Smartphone.

• Select “Bluetooth Mode”
  • “Classic” Bluetooth Mode is the default, then select “Broadcast”.
  • The app should automatically scan for nearby Auracast broadcasts, however you can select the “Search” button to scan again. 

• The names of the available broadcasts will appear in a list below “Available Broadcast Source”. Select one of these to connect to the broadcast.

  • Your BT-LE will automatically connect.
    
  • The light on the BT-LE will be purple and pulse slowly when connected to a broadcast.

Step 3: Connect the BT-LE to a receiving device to listen

• Using either the provided 3.5mm Audio Cable or USB-C Audio Cable, connect the BT-LE to a receiving device (e.g. headphones or speaker).