1. Audeara Support Centre
  2. Bluetooth and connectivity

How do I connect two sets of A01 Headphones to my BT01 Transceiver?

  1. Plug power cable into the transceiver and into a wall socket or USB port on the television
  2. Plug cable into the audio port of the device, with the other end plugged into the ‘audio in’ port or ‘optical audio in’
  3. Place the switch on the back of the device into Tx mode
  4. Put the transceiver into pairing mode by holding the front, spring-loaded switch towards the Bluetooth symbol for at least 5 seconds
  5. Place the first pair of headphones into pairing mode by holding down the middle button for 5 seconds or until the LED light is flashing red and blue
  6. The LED light on the headphones will change to a solid blue and the transceiver light will also change to just blue when they have connected successfully (i.e., no red)
  7. Check they are connected by playing audio through your device
    1. Remember: if you are using the headphone cable, change the front switch to AUX. The LED light will be green instead
  8. Turn the first pair of headphones off
  9. Turn the second pair of headphones on and place them in pairing mode (repeat step 5 for this pair)
  10. Again, once connected both LED lights on the transceiver and headphones will be blue
  11. Test that the audio comes through properly (If using headphones cable remember to put in AUX mode)
  12. Turn the second pair of headphones off
  13. Turn the transceiver off (via the switch on the back)
  14. Turn the transceiver on
    1.  The LED light should be green if using headphones cable or blue if using the optical cable
  15. Turn the first pair of headphones on
  16. Turn the second pair of headphones on   
  17. Both Headphones will be connected

If you have any trouble with this, please do not hesitate to get in touch with our support staff at support@audeara.com